Castle Creations Direct Sensor Cable 250mm - CC011-0146-00

Castle Creations Direct Connect sensor cable – 250 mm

Tidy up your wiring! The Direct Connect sensor cable makes Castle's sensor adapter cable unnecessary. It removes a connection point and gives a neater installation. One end has the standard ROAR sensor plug that goes into the back of any sensored motor, and the other end plugs directly into a waterproof, sensored Castle ESC.

Features

• Replaces Castle's sensor adapter cable – one connection point fewer
• Standard ROAR sensor plug at the motor end
• Fits all sensored brushless motors
• Available in 200, 250 and 300 mm (300 mm comes with the XLX2 ESC)

Compatible models

• Castle Mamba Micro X
• Castle Mamba X
• Castle Mamba Monster X
• Castle Mamba Monster X 8S
• Castle Mamba XLX2

How to fit it: Plug the cable into the back of the motor – the plug only fits one way. On the Mamba Micro X, remove the old sensor cable (or the dust cover) from the ESC and plug in the new one so that the white wire lines up with the white dot on the side of the ESC. On the Mamba X, first remove the 2 screws by the capacitors with a 1.5 mm hex key and take off the cable holder, swap the cable in the same way, then refit the holder and screws.

We ship with GLS:

From our warehouse in Denmark.
Shipping is calculated at checkout.
Business customers are welcome.