Hobbywing 30109003 - QuicRun WP 8BL150 G2 Sensorless ESC 3-6S Car 1/8

Hobbywing QuicRun WP 8BL150 G2 Sensorless ESC 3-6S for 1/8 cars

The Hobbywing QuicRun WP 8BL150 G2 is a waterproof and dustproof sensorless speed controller (ESC) designed for 1/8 trucks and monster trucks. With IP67 protection it is ready for harsh weather and rough terrain. Please note, however, that the IP67 rating covers splash, water and dust resistance in normal use; the protection is not permanent and can deteriorate over time through wear and ageing. The ESC should therefore not be submerged in water for long periods.

The innovative intelligent freewheeling technology gives the ESC higher driving efficiency and a lower operating temperature, improving both stability and reliability. The internal power board is covered by a patented heat-conducting copper busbar that quickly transfers heat to the heatsink, and a fan is fitted for extra cooling — altogether an efficient and reliable cooling system.

The built-in switch-mode BEC has been upgraded from previous generations and now supports an adjustable 6V/7.4V output with 6A continuous and up to 12A maximum current, making it compatible with most powerful high-voltage servos on the market. The ESC has several built-in protection functions, including low-voltage cut-off, overheat protection, throttle signal loss protection, current protection and capacitor overheat protection, which effectively prevent damage from overload.

The upgraded electronic switch solves the corrosion and impact damage problems that often affect traditional mechanical switches in dusty and damp environments, so unwanted shutdowns are avoided. The ESC has a separate programming port, so you do not need to unplug the throttle lead from the receiver when connecting a programming card — making it easy to adjust in practice.

Technical data

• Type: Brushless, sensorless, IP67 ESC
• Continuous/peak current: 150A/950A
• Input voltage: 3-6S LiPo
• BEC output: Switch Mode 6V/7.4V @ 6A
• Input wires: 10AWG-150MM
• Output connectors: 6.5mm Gold (female)
• Input connector: No
• Size: 60x48x40.4mm
• Weight: 169.5g
• Firmware update: Not supported
• Motors: Sensorless / Sensored Brushless (sensorless mode only)
• Vehicles: 1/8 Trucks & Monster Trucks
• KV rating/T-count: With 4S LiPo: KV ≤ 3000 - With 6S LiPo: KV ≤ 2400, 4274-size motor
• Programming via SET button on ESC: Not supported
• LED Program Box: Supported
• LCD G2 Program Box: Supported
• OTA Programmer: Not supported
• Programming port: Separate programming port
• Built-in capacitor: 2040 uF

We ship with GLS:

From our warehouse in Denmark.
Shipping is calculated at checkout.
Business customers are welcome.