Mid Cure 15min Epoxy 255g (9 oz)

BSI Mid-Cure 15 min. epoxy – 255 g

Do you need to bond large surfaces or slightly more complex joints? Then Mid-Cure 15 min. gives you the extra working time you need. It is a two-part hobby adhesive where resin and hardener are mixed in equal parts to form a very strong bond that resists most chemicals.

Mid-Cure is the most flexible of BSI's epoxies and handles moisture better than Quik-Cure 5 min. That makes it the obvious choice when you need to bond parts to fibreglass – e.g. hardwood to fibreglass – and for joints with a lot of vibration or heavy stress.

Features

• Two-part epoxy, mixed in equal parts
• BSI's most flexible epoxy – not brittle
• More moisture-resistant than Quik-Cure 5 min.
• Ideal for large surfaces, complex joints and bonding to fibreglass
• Resistant to most chemicals once cured

Specifications

• Contents: 255 g (9 oz)
• Working time: approx. 10 minutes – adhesion begins after approx. 15 minutes
• Handling time: after 45 minutes
• Full strength: after two hours (fully cured after 2-3 hours)
• Application temperature: above 65 °F
• Suitable for: Balsa, softwood, hardwood (best), glass and metal, fibreglass, hard plastic, rubber, white foam, laminating, reinforcement and water-resistant joints

Please note: The adhesive bonds best to clean, rough surfaces – sand smooth, non-porous surfaces with coarse sandpaper. Uncured epoxy is best removed with acetone or isopropyl alcohol.

Please note: Contains epoxy resin and polyamine resin and may cause skin irritation. In case of skin contact, wash with soap and water. Do not swallow. Use good ventilation and keep the product out of the reach of children.

We ship with GLS:

From our warehouse in Denmark.
Shipping is calculated at checkout.
Business customers are welcome.