Traxaxs serielt kabel – TRX3063

Genuine Traxxas spare part TRX3063 for your Traxxas remote-controlled car or boat.

The connector can be used for e.g. the E-Revo VXL 1/16 - but it applies to all Traxxas "VXL 1/16" models.

NOTE: You must use two identical batteries, and they must be equally charged or discharged. Otherwise the batteries may be destroyed.

NOTE: In a Traxxas 1/16 VXL remote-controlled car the gearing MUST be changed before you go for higher speed. The gearing is normally included in the original box with the car.

For example, the cable must not be used with the setup below, as the electronics in question cannot handle it.

The correct setup with TRX3063 (series cable), a Traxxas 1/16 VXL car and 2 batteries is:

Please note that there are two different cables. They are shown below:

To go to TRX3034 - parallel cable (longer running time), click HERE

For example, the following two batteries can be used together with the two cables above - again, pay VERY close attention to the type of electronics in your car. For example, an E-Revo 1/16 VXL can NOT use the 3063 cable (series) with 2 x 11.1V LiPo batteries (go to the battery - click HERE), as it would otherwise burn out.
An E-Revo 1/16 VXL can use 2 x 7.4 V LiPo batteries for optimal performance. See the battery, click HERE

All versions of the 1/16 scale Traxxas cars can use the 3064 cable (parallel) together with this 11.1V battery and will thus get a longer running time. Please note, however, that a longer running time generates more heat.

If in doubt or if you have questions, contact Hobbyviking

English: Wire harness, series battery connection - TRX3063

Traxxas UPC: 02033430630

We ship with GLS:

From our warehouse in Denmark.
Shipping is calculated at checkout.
Business customers are welcome.