Ugears Engine Clock

Ugears Engine Clock – wooden mechanical table clock with an engine theme

A clock that ticks – and pistons that pump! The Engine Clock is a working mechanical table clock with a pendulum, built entirely around a car theme. On top sits an engine block with moving pistons, the hours are shown on a speedometer, the minutes on a rev counter, and the seconds run on a dial at the back of the clock.

You wind the clock with the ignition key at the front, and it then runs for up to five hours. If you disengage the pistons, you get another 60 to 90 minutes. The minute hand is retrograde and resets itself after 60 minutes – and the pendulum gives a pleasant ticking sound in the living room.

The parts are laser-cut from wooden boards and are assembled without glue or special tools. The instructions are available in eleven languages, and you can get spare parts free of charge on request.

Features

• Working mechanical table clock with pendulum and escapement
• Runs for up to five hours on one winding – 60 to 90 minutes more if the pistons are disengaged
• Engine block with moving pistons on top
• Hours as a speedometer, minutes as a rev counter
• Seconds dial at the back of the clock
• Retrograde minute hand that resets after 60 minutes
• Adjustable pendulum: the round weight at the bottom for coarse adjustment, the ball at the top for fine-tuning
• Wound with the ignition key at the front

Specifications

• Model dimensions: 14.2 x 30 x 12 cm
• Number of parts: 265
• Build time: approx. 5 hours
• Difficulty: Medium
• Recommended age: 14+
• Drive: Metal spring with pendulum and escapement
• Made in: Ukraine
• Packaging: 37.3 x 17 x 5 cm, 730 g

We ship with GLS:

From our warehouse in Denmark.
Shipping is calculated at checkout.
Business customers are welcome.